







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Refacing Kitchen Cabinets Costs in Palmdale, CA
A standard refacing job on a Palmdale tract-home kitchen runs $3,800-$9,200, and a full builder-grade box swap paired with refacing lands inside the $14,000-$45,000 Kitchen Remodel range when the carcasses can’t be saved. Call Rowan Construction Group Palmdale at (844) 320-8244 for a written price before any door is ordered. We inspect the original boxes first, because in this housing stock the number depends on what’s behind the faces, not on the faces themselves.

Why Palmdale Cabinets Age Differently Than Coastal Ones
Palmdale’s high-desert climate runs hot and bone-dry most of the year, then swings cold at night and occasionally soaks the valley in a monsoon burst. That rhythm is hard on adhesive. The veneer glue holding refaced faces to a carcass expands and contracts with the same seasonal swing that makes stucco crack on the west-side subdivisions. Near-zero humidity most of the year pulls moisture out of particleboard, and a rare intense storm pushes it back in. Do that for twenty years and the board delaminates from the inside out.
Most of the homes we walk into here were built during the 1980s-2000s tract boom: stucco on wood frame, slab foundations, builder-grade cabinets that were never meant to see a third decade. The original boxes are commonly 12-inch uppers and 24-inch lowers, and in a fair number of kitchens those depths are off by a quarter to half an inch from today’s stock sizing. That matters, and we’ll get to why in the pricing below.
The Box Inspection Comes Before the Quote
Refacing means new veneer on the visible carcass, new doors, and new drawer fronts, keeping the original box. That only works if the box is sound. So before Rowan writes a refacing number, a technician documents the carcass condition: face-frame integrity, shelf-pin hole condition, water staining under the sink, and delamination along the bottom rails where a slow valve drip or a mopped floor has done its work. You get the photo record of what we found, standard on every visit, so the line between “this is fine” and “this needs reinforcement” isn’t something you have to take on faith.
When a box does need reinforcement, we price it as its own line and have you sign the change order before anything proceeds. Under the Haven Standard, no work moves until the paperwork does. That’s the difference between a $4,200 refacing job that stays $4,200 and one that grows a surprise invoice the day the crew starts prying off doors.

What Refacing Costs, Broken Down by Part
Here’s how the money actually splits. Refacing is not one price, it’s five or six, and bundled quotes hide the ones that move.
| Component | Typical cost, Palmdale |
|---|---|
| Box-condition assessment and prep labor | $250-$600 |
| New wood or thermofoil veneer faces (per linear foot, installed) | $110-$180 |
| Replacement doors, door-only order (KraftMaid or Wellborn) | $1,400-$3,200 |
| Drawer fronts and box repair | $300-$700 |
| Hardware (hinges, pulls, soft-close upgrades) | $200-$550 |
| Custom door sizing for non-standard depths | +$400-$1,200 |
| Full refacing total, standard kitchen | $3,800-$9,200 |
A few things move that bottom-line number. Non-standard depths force a custom door order instead of stock, and that’s the $400-$1,200 line above. Delamination across several carcasses can add $600-$1,400 in reinforcement and re-facing prep. And material choice does more than change the look: rigid thermofoil holds up better against a hot, dry interior than a thin wood veneer does, because there’s less glue edge to fail when the humidity drops and springs back. Over ten years, the thermofoil job usually costs less to keep looking right, even when the sticker on day one runs a touch higher.
Refacing vs. Painting vs. Full Replacement: A Way to Decide
The question isn’t which option looks best in a photo. It’s which one fits the boxes you actually have and the layout you actually want.
- Refacing fits when the layout works, the boxes are structurally sound, and you like the door style but not the color or hardware. It’s the lowest-cost path to a genuinely new kitchen façade.
- Painting fits when the boxes and doors are both solid and the finish is the only problem. It’s the cheapest option, but a painted builder-grade door still wears like a painted builder-grade door.
- Full replacement fits when the layout is wrong, the boxes have failed, or you’re moving a wall. That’s where a proper Kitchen Remodel with new cabinet installation in the $4,000-$13,000 range for the cabinetry alone starts to make sense, before you add countertops in the $2,000-$6,500 range and a backsplash at $800-$2,500.
A full refacing that leaves the layout intact belongs in the $14,000-$45,000 whole-kitchen range only when it’s part of a bigger renovation, not when it’s refacing alone. If you’re weighing a larger scope, our Kitchen Remodeling in Palmdale page lays out how a full project is priced from demo through finish. For smaller freshening work, the home page gives a sense of what we cover across every trade.
What You’ll Get in Writing, Always
A written flat price with a written scope and a written warranty before any work starts. No “call for a quote.” If you bring a competitor’s estimate, we’ll review it line by line at no charge and tell you what it’s assuming about your boxes. That free second opinion is one of the standing offers at Rowan Construction Group Palmdale, and it’s worth taking before you commit to a refacing number from anyone.
Our technicians have up to 19 years of experience and arrive background-checked and uniformed. Calls get answered by a live person around the clock.
FAQs
Refacing kitchen cabinets in Palmdale typically costs $3,800-$9,200 for a standard tract-home kitchen, with the range driven mostly by door material, kitchen size, and whether the original particleboard boxes need reinforcement. Call (844) 320-8244 for an exact written quote after we inspect the boxes.
Often yes, but only after an inspection, because 1990s particleboard delaminates faster in the Antelope Valley’s dry heat and seasonal swings than it does in coastal markets. When a carcass has failed, we document it, price the reinforcement, and require a signed change order before continuing.
Refacing costs less than full replacement in most cases, typically $3,800-$9,200 versus $4,000-$13,000 for new cabinet installation alone, but only when the layout stays the same and the boxes are sound. If a box has failed or you want to change the layout, replacement usually wins on total cost. Call (844) 320-8244 and we’ll walk you through which fits your kitchen.
Yes. Plenty of Palmdale subdivisions were built with 12-inch uppers and 24-inch lowers that don’t match today’s stock sizing, so we order custom doors from KraftMaid or Wellborn when needed, which adds $400-$1,200 to the job. That cost shows up on the written quote before ordering, never as an afterthought.
Get a Written Refacing Price
Bring us a competitor’s estimate and we’ll review it line by line for free. We’ll inspect your boxes, document what we find, and hand you a flat written price before a single door is ordered. Call (844) 320-8244 to schedule your Palmdale estimate.
Written by the team at Rowan Construction Group Palmdale, serving Palmdale, CA.
What Our Customers Say
"Talked us out of the larger scope we came in asking for, because it would not have added the value we thought."
- Emil R."Final invoice was within two percent of the contract. Every change was priced and signed before anyone picked up a tool."
- Malcolm T."Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F.












