A Rowan company - serving Palmdale, CA
A new herringbone paver driveway
Belgard · Palmdale

Belgard Driveway & Pavers in Palmdale, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Palmdale
A new concrete driveway with a paver border
A new paver patio with a seat wall and fire pit
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
New architectural shingles with a clean valley
A new casement window over a kitchen sink
A new white vinyl privacy fence with a double gate
New painted shaker cabinets with an organized deep drawer
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Belgard Driveway & Pavers in Palmdale: What to Know First

We install and repair Belgard paver driveways, patios, and walkways in Palmdale as an independent Belgard service provider. Most residential Belgard driveway projects run 3 to 7 working days from demolition to cleanup, and paver driveway installation typically costs $7,000 – $18,000 depending on square footage, base prep, and which Belgard series you choose. The price is written before anyone starts, with a line-item scope and a written workmanship warranty attached. This page is for Palmdale homeowners who already own a Belgard surface or are comparing Belgard against concrete and asphalt, and who want the number on the page before they call.

Call (844) 320-8244

Call (844) 320-8244 to schedule a free estimate.

How Belgard Products Fail – and How We Fix Them

Belgard makes a genuinely good paver. What fails on a Palmdale driveway is almost never the paver face; it’s what’s under it, and how it was edged and drained. Here are the five failures we see most often, and what we do about each.

  • Base failure under the driveway apron. In Palmdale, the Antelope Valley’s swing from 100°F summer days to near-freezing winter nights causes clay-heavy subgrade to expand and contract. Belgard’s Cambridge Cobble and Urbana Stone are rigid enough that they telegraph every base dip: you get rocking pavers and sand washing out at the apron within 3 to 5 seasons. Our fix is to pull the affected field, re-compact the aggregate base in 2-inch lifts to 95% density, and re-lay on a fresh bedding course.
  • Edge restraint lift at the driveway lip. Catalina Grana and Catalina Slate are heavy, and when the plastic edge restraint was spiked into loose soil or omitted at the street cut, the outermost course creeps outward. We reset the edge with a concrete-set aluminum restraint and re-tie the border course, which is the part other crews skip.
  • Efflorescence that keeps coming back. White bloom on Belgard’s Holland Stone or Cambridge is a moisture symptom, not a surface stain. If it returns every spring, water is trapped under the pavers because the slope is wrong or the joints are over-filled. We re-grade to a 2% fall away from the garage, re-sand with polymeric joint sand, and treat once rather than scrubbing seasonally.
  • Polymeric sand erosion on the border. Cheap joint sand washes out of the herringbone border on a Palmdale driveway after a single monsoon-season gully-washer. We replace it with a quality polymeric sand and pack it correctly, which is the difference between a joint that lasts 8 to 10 years and one that lasts two.
  • Staining and scaling on pool decks and patios. Belgard’s Mega-Lafitt and other rustic profiles hold hard-water scale from our mineral-heavy tap water; on pool decks, the texture that makes them slip-resistant also traps it. We clean with a pH-balanced product, re-seal with a breathable sealer, and advise on how the pool’s overflow line should be pitched so it isn’t dumping mineral water onto the pavers.
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Our Belgard Driveway & Pavers Process

  1. 1
    On-site diagnosis and written scope. We walk the driveway, measure square footage, check the slope with a level, sound the base with a probe, and photograph the existing condition. You get a written scope and a flat written price before we schedule anything. Under Clause 1 of the Haven Standard, the price is in writing before work starts.
  2. 2
    Material decision. You choose the Belgard series; we explain the trade-off between, say, Holland Stone (single-piece, denser, easier to relay) and Cambridge (three-piece system, more visual range but a more complex re-lay). OEM Belgard pavers and quality aftermarket substitutes are both laid out for you with per-square-foot numbers so you can compare fairly.
  3. 3
    Demolition and base prep. Pavers are lifted and stacked for reuse where possible. Base is excavated to depth, geo-textile laid, and aggregate compacted in lifts. String lines and laser levels set the grading.
  4. 4
    Installation. Bedding sand screeded, pavers laid to pattern, cut at edges with a wet saw, edge restraint set, and polymeric joint sand packed in.
  5. 5
    Test and photo record. We check drainage under a running hose, verify every course, and take a documented photo record of the base, the edge, the slope, and the finished surface. That record is yours and is included on every visit.
  6. 6
    Cleanup and warranty handoff. Site is cleared, and you receive a written workmanship warranty on top of the Belgard product warranty, which we handle as a separate claim if a paver itself ever fails.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Belgard Driveway & Pavers Costs in Palmdale

A crew setting pavers over a compacted base

These are the ranges Palmdale homeowners see on our written estimates. Every number below is a typical job, not a teaser, and every one is written on the page before you sign.

  • Paver driveway installation (Belgard): $7,000 – $18,000
  • Concrete driveway installation (as a cost comparison): $4,500 – $12,000
  • Asphalt driveway paving: $3,500 – $9,000
  • Full driveway replacement (any surface): $5,000 – $14,000
  • Driveway sealing, including Belgard pavers: $250 – $700
  • Paver patio installation (Belgard): $3,500 – $11,000

What moves the number: square footage is the biggest driver, then base depth (Palmdale’s expansive clay often means more excavation than a coastal job), then pattern complexity (herringbone takes longer than running bond), then Belgard series (Catalina runs higher than Holland Stone), and finally whether the existing base can be reused or has to be fully rebuilt. A free second opinion on any written estimate is standing offer: bring a competitor’s quote and we’ll review it line by line at no charge. Call (844) 320-8244 for an exact quote.

Why Palmdale Homeowners Call Rowan Construction Group Palmdale for Belgard Work

Founded in 2007, Rowan Construction Group has delivered 4,000-plus projects, every one with a written price before work started and a documented photo record when the crew left. Our technicians have up to 19 years of experience, and they’ve laid Belgard across the Antelope Valley long enough to know the specific series that fail at the street lip versus the ones that fail at the joint. We back every install with the 365-Day Done Right Promise: if it isn’t done right, we make it right, in writing, not on a handshake. No change proceeds without a signed change order, which is why our projects finish within a few percent of the agreed price. Crews are background-checked and uniformed, calls are answered by a live person 24/7, and a photographed record of what was found and what was done is included on every visit. We also source across the same vetted-brand bench for our other trades: KraftMaid and Wellborn cabinetry, Kohler and Toto fixtures, GAF and Owens Corning roofing, PGT windows.

FAQs

A remodeled primary bathroom with a soaking tub and walk-in shower

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
New double-hung windows in a dining roomA new front yard fence with a matching gateAn open kitchen and dining area after a remodelA freestanding soaking tub in a remodeled primary bathroomA second-story addition that matches the existing rooflineA newly finished roof with a ridge vent and step flashing

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Palmdale

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Palmdale team

A local vetted partner works across Palmdale and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-8244
Local Service Coverage

Request a Free Estimate in Palmdale

Tell us what you need - Rowan Construction Group Palmdale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch